Create a free account to earn points & rank
Samurai Sword Tokyo
Orders Cart
Sleeves and Storage for 30th Celebration Cards: Japanese Card Size, Binders and PSA Slabs

Sleeves and Storage for 30th Celebration Cards: Japanese Card Size, Binders and PSA Slabs

Before you buy sleeves, toploaders or a binder for your 30th CELEBRATION cards, it helps to know the actual numbers: how big the card itself is, and how much bigger a graded slab is once a card has been sent to PSA. Both are simple measurements, and both come from our own published card-size article, which we link and quote below rather than restate from memory.

Updated October 7, 2026 — Store Listings Refreshed

The October 7, 2026 update covers our store listings and prices only; the other facts in this article were last checked on September 25, 2026.

Key Takeaways

A 30th CELEBRATION card measures roughly 63mm × 88mm (2.5in × 3.5in) — the same “poker size” footprint used across the wider trading card industry, and the same size as English-language Pokémon cards. A PSA slab is a different object entirely, commonly reported at roughly 83mm × 136mm × 6.5mm (3¼in × 5⅜in × ¼in). See our full Pokémon Card Size and Dimensions guide for the source figures.

Store prices and availability checked October 7, 2026. Marketplace observations retain their stated dates. USD figures convert at ¥154/USD, approximate.

63mm
Card Width

88mm
Card Height

83mm
PSA Slab Width

136mm
PSA Slab Height

Measurements are quoted from our published card-size article (samuraiswordtokyo.com), dated September 4, 2026. We do not sell sleeves, toploaders or storage boxes directly, so this guide describes sizes only — not specific products to buy.

How Big Is a 30th CELEBRATION Card

Exeggcute 001/103, main-set card from 30th CELEBRATION, official card database image
Exeggcute 001/103, main set — 30th CELEBRATION (M6a), official card database image

Per our card-size article: “A Pokemon card measures roughly 63mm × 88mm (2.5in × 3.5in).” That figure applies to a standard 30th CELEBRATION card straight out of the pack — main set, AR, SAR, FUR or Classic Collection, since rarity changes the foiling and border treatment, not the physical dimensions. That holds whether the card came from our own 30th CELEBRATION Booster Box or any other sealed source, and whether it is a common or a secret rare.

Japanese and English Cards: Same Size

Alolan Exeggutor 002/103, main-set card from 30th CELEBRATION, official card database image
Alolan Exeggutor 002/103, main set — 30th CELEBRATION (M6a), official card database image

Our card-size article states plainly: “Japanese and English Pokemon cards use the same card size.” If you’re mixing a Japanese 30th CELEBRATION card into a binder or box built for English cards — or the reverse — the physical footprint is identical, so nothing about the language edition changes what fits.

Why “Poker Size” Matters for Storage

Pikachu 017/103, holo subset card from 30th CELEBRATION, official card database image
Pikachu 017/103 (Ken Sugimori) — 30th CELEBRATION Pikachu holo subset, official card database image

Our article describes that footprint as “the same physical footprint as the ‘poker size’ used across the wider trading card industry.” That is the useful takeaway if you’re shopping for sleeves, toploaders or binder pages: any product built to the standard poker-card footprint is sized to fit a 30th CELEBRATION card, whichever rarity you’re holding. We don’t sell sleeves or binders ourselves, so beyond the measurement itself, this guide doesn’t point you to a specific product.

The PSA Slab Is a Different Size

Charizard 137/103, Classic Collection reprint in 30th CELEBRATION, official card database image
Charizard 137/103, Classic Collection reprint — 30th CELEBRATION (M6a), official card database image

Once a card is graded, it is no longer a bare 63mm × 88mm card — it is sealed inside a PSA holder. Our card-size article puts PSA holders “commonly reported at roughly 3¼in × 5⅜in × ¼in (~83mm × 136mm × 6.5mm).” A raw-card box will not hold a slab, and slab storage is not sized for loose raw cards — the two need separate storage. A PSA grade is an assessment of the card itself, not of the slab it is sealed in; light surface scratches on the slab, minor whitening or cloudiness, and molding variations are commonly present from the time PSA ships the slab and are not defects, per our Product Condition Guide. Our own PSA-graded product listings print a shipping-package dimension, not the slab dimension itself, so use the figures above for the slab, not a product’s packed shipping size. Per our Product Condition Guide, the certification number on each slab can be verified on PSA’s official website, and except where the slab is cracked open or has been tampered with, condition of the case itself is not grounds for a return or refund. Our Japanese Pokémon card grading guide covers PSA, BGS and CGC generally if you’re deciding whether to grade a card at all before you plan storage for it.

Raw Cards vs Graded Cards: Two Storage Problems

A “raw” card — one that has not been sent to a grading company — is the object described above, and only that. A graded card is a different physical object once it comes back from PSA: the card itself is unchanged, but it now lives permanently inside a hard plastic holder. Any storage plan for a 30th CELEBRATION collection has to treat these as two separate categories rather than one, because a solution sized for one will not fit the other. If you are holding both raw singles from a Booster Box and a graded card bought already encapsulated, expect to store them in two different systems, not one.

Width Height Thickness
Raw card ~63mm (~2.5in) ~88mm (~3.5in) not printed in our source article
PSA slab (encapsulated) ~83mm (3¼in) ~136mm (5⅜in) ~6.5mm (¼in)

Those figures come from our card-size article’s own measurement table.

Shop this setM6a 30th CELEBRATION Booster Box Japanese Pokemon Card
¥19,194In stockOn sale now
Ships from Tokyo with tracking
View product

Storing Sealed 30th CELEBRATION Product

None of the measurements above apply to an unopened box or pack — a sealed 30th CELEBRATION Booster Box is a factory-sealed product, not a stack of loose cards, and its own outer dimensions are separate from the card size discussed here. If you’re storing sealed product rather than singles, keep it in its original shrink wrap; our Product Condition Guide covers what counts as normal wear on that packaging versus a defect. Our 30th CELEBRATION complete guide has the wider release picture if you’re new to this set, and the full 30th CELEBRATION card list shows every card you might be sleeving.

📩 MembersGet member-only sale alerts & coupons

Where to Buy

Our 30th CELEBRATION Booster Box is currently listed at ¥26,654 (~$173) sealed / ¥26,431 (~$172) no shrink. If you’d rather start from a graded card at the size discussed above rather than opening packs, browse our PSA 10 collection for currently listed slabs, or the wider Japanese Pokémon card collection. For anything specific, use Quick Order.

Frequently Asked Questions

What size is a 30th CELEBRATION card?

Roughly 63mm × 88mm (2.5in × 3.5in), per our card-size article. This applies to every rarity in the set, since rarity changes the printing, not the physical size.

Are Japanese 30th CELEBRATION cards a different size than English Pokémon cards?

No. Japanese and English Pokémon cards use the same card size.

How big is a PSA slab compared to a raw card?

Much bigger. A PSA holder is commonly reported at roughly 83mm × 136mm × 6.5mm (3¼in × 5⅜in × ¼in), versus 63mm × 88mm for the raw card inside it.

Will standard trading-card sleeves fit a 30th CELEBRATION card?

The card’s 63mm × 88mm footprint is the same “poker size” used across the wider trading card industry, so products built to that standard size fit. We don’t sell sleeves or binders ourselves, so this guide covers the measurement, not a specific product.

Does a card’s grade or condition change its physical size?

No. Grading changes how the card is judged and how it is packaged — sealed inside a PSA slab — not the size of the card itself.

Where can I buy a PSA 10 graded card at this size already encapsulated?

Our PSA 10 collection lists currently available graded singles, each shipped in its PSA slab.

📩 Get member-only sale alerts & coupons

Sale alerts, coupons and restock notices by email — straight from Tokyo.

Sealed Japanese TCG — shipped worldwide from Tokyo

Shop live stock & get restock alerts

Sealed Japanese booster boxes and PSA 10 graded cards, held in our Tokyo warehouse and shipped worldwide. Join the mailing list and we will email you when new stock lands.

  • Sealed, authentic Japanese TCG
  • FedEx international shipping
  • Support for larger orders